Kingston Road in Toronto, Ontario
  • Requires no drilling through brick and no mortar or adhesives
  • Easy installation for the do-it-yourself handyman or contractor
  • Interior and exterior applications
  • Allows ventilation behind wall
  • No foundation required
  • Special 45 degree outside beveled corners to allow perfect mating on corner joints
  • Withstands repeated freeze / thaw temperature cycling between -20F and 120F
  • Installed weight is about 9 lbs per square foot
  • Packaged with 6 bricks per pack, covering 4 square feet
  • Bricks measure 4" X 23 5/8" X 1" each
  • 24 gauge G90 galvanized steel mounting rails are corrosion resistant and come in 10 foot lengths
  • Non-combustible; effective heat shield for wood stoves
  • In accordance with ULC (Underwriters Laboratories of Canada) for use behind wood stoves as a heat shield, can reduce clearance up to 50%

EZ ROCK ™ is available in 7 fade resistant standard colours; Natural White, Light Grey, Light Green, Tan, Red Brown, Chestnut, and Charcoal.



Frequently Asked Questions

What is it made of?

It is a cementious product.

Is this a new product?

Yes and no. It is new to Canada, but it has been used for over 30 years in Scandinavia.

Where can it be used?

Outdoors, it can be used for new construction and for renovating building walls, as well as for landscaping around porches, etc...

Indoors, on walls, it can be used as a functional and decorative heat shield for wood stoves.

Can I install it?

Yes, fairly easily. There is a thorough installation manual available and a few simple tools are needed; power drill, tin-snips, circular saw with a dry cut masonry blade.

What's the purpose of the air space?

The purpose of the air space is to allow ventilation. This is otherwise known as a vented rain-screen effect.

As an indoor application, the air space is necessary for use behind a wood stove. It allows the hot air to ventilate, thereby allowing the wall surface behind the brick to stay cooler.

Can the clearances for wood stoves be reduced?

Yes, up to 50% reduction in clearance over the wood stove manufacturer's label can be achieved, as per ULC Code.

Can it be sealed or painted?

Yes, but it is not necessary. The colour pigments are throughout the bricks, and an ad-mix is used to seal the product, inside and out. The colours are fade resistant. However, if custom colours are desired the bricks can be painted.